Price Promise OCQ
Timber Support Glazing Bars > Timber Support Bars & Accessories > 'Lead Alternative'

'Lead Alternative'

'Lead Alternative'

'Lead Alternative' - Timber Support Bars & Accessories

Self Adhesive Flashing Tape, 10 Metre Ro

Black Jack Self Adhesive Flashing Tape

Description
A strong self-adhesive flashing tape comprising of an aluminium foil and a bitumen rubber adhesive.
The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.

Benefits
Replaces need for lead flashing.
Self-adhesive - requires no separate glue.

10.27
Price Promise - we will not be beaten on price

Area for use

• General repair to existing flashing.
• Flashing bituminous felt and similar roofs.
• Flashing parapet walls.
• Sealing roof glazing.
• Replacement off lost lead flashing.
• Repairs to cracks in concrete.
• Repairs to lead gutters.
• Sealing capping bolts in roof sheets.
• Sealing roof ridges.
• Protective coating to insulation materials.
• Sealing projections through roofs and similar sections.
• Flashing between timber and brickwork or blockwork or blockwork cavities.
• Flashing of skylights.

Limitation
• Prime porous surfaces with BLACK JACK BITUMEN AND FLASHING PRIMER.
• Do not apply to damp surfaces.
• In cold weather or storage conditions, adhesion may be reduced. Bring up to temperature or heat bitumen adhesive layer with a hot air blower to improve adhesion.

Surface Preparation
All surfaces must be dry, sound and free from oil, grease and dust Remove all loose material by scraper
or wire brush. Porous surfaces, such as concrete or brick, should be primed using BLACK JACK
BITUMEN AND FLASHING PRIMER and allowed to dry.

Helath and safety
Contains Bitumen . Harmful and Possible risk of irreversible effects. Keep away from sources of
ignition - no smoking. Avoid contact with skin. Wear suitable protective clothing,

Storage
Store in original container in cool dry conditions. Keep away from sources of ignition.

Self life
Store in original container in cool dry conditions. Keep away from sources of ignition.

  Product
White Snap On Glazing Bar
Fits 10, 16 & 25mm Polycarbonate
White Snap On Glazing Bar For 35mm
Additional Glazing Bar End Caps
'1 End Cap Is Provided With Each Bar'
Brown Snap On Glazing Bar
Fits 10, 16 & 25mm Polycarbonate
Brown Snap On Glazing Bar For 35mm
White Aluminium F Section
Powder Coated Edge Trim
Brown Aluminium F Section
Powder Coated Edge Trim
MK2 Ridge - 100mm Capping
Top Cap Not Included
Lean To Flashing Profile
For Roof Pitches 5-45 Degrees
CSD Bridging
Connects Glazing Bar To Flashing
Pvc Glazing Bar F Edge Strip Brown
Not Suitable For 35mm
Pvc Glazing Bar F Edge Strip White
Not Suitable For 35mm
PVC End Sheet Closures
2100mm Length
Polycarbonate Silicone
Fast, Neutral Cure, Low Modulus Sealant
Below are the most common sizes of lead rolls
'Lead Alternative'
Self Adhesive Flashing Tape, 10 Metre Ro
150mm Wide x 3 Metre Long
150mm Wide x 6 Metre Long
240mm Wide x 3 Metre Long
240mm Wide x 6 Metre Long
Price per Roll
33 Metres Of Aluminium Solid Tape
For Top Of Sheets
33 Metres Of Anti Dust Breather Tape
For Bottom, Allows Sheet To Breath
Pack Of 10 Fixing Buttons
For Fixing Polycarbonate To Timber